Procedure for installation on W2k server with sp3. 

Installation Of SAP 4.6b 

System Requirements. 

P-III System 
1024 MB or 512 MB RAM 
Minimum 60GB HDD 
40 GB Hdd (2GB for WinNT & 38 GB for oracle & SAP) 
10 GB Hdd for CD dumps. 
CDROM drive. 
Network Card 

C:\ - 10GB - Windows 2000 Server - NTFS 
D:\ - 40GB - Oracle & SAP - NTFS 
E:\ - 10GB - CD Dumps - NTFS 
F:\ - CDROM Drive 

Install Windows 2000 server in first 10GB partition 
Computer Name - SAPSRV 
IP Address - 192.168.1.2 
Subnet Mask - 255.255.255.0 
Work Group - TEKSOFT 
Complete the installation & Restart. 

Install Service Pack 3 
Install All the Drivers 
Install IE6 SP1 

Create two Users as mentioned bellow 

Start -> Programs -> Administrative Tools -> Computer Management -> Local Users 
and Groups -> Users -> New User 

a. First user name TEKADM
Give password, disable the already enabled option & enable 
"Password Never Expires & user cannot change the password option " 

b. Second user name SAPServiceTEK
Give password, disable the already enabled option & enable 
"Password Never Expires & user cannot change the password option " 

Add the two Users to Administrators Group 

Change hostfile 

Open C:\Winnt\System32\driver\ect\host file in Notepad & add IP Address and Computer Name in 
The bottom of file. Save & Exit. 
 

Change the Virtual Memory 

C: Min - 512MB 
Max - 1024MB 

D: Min - 2048MB 
Max - 2560MB 

Change the File and Printer sharing properties to “ Maximize through 

Logon as TEKADM
Insert SAP-Oracle CD & 
Select F:\NT\i386\setup & click enter 
Location of oracle D:\orant & click enter 
Accept path change & click enter 
Oracle 8 enterprise edition & click enter 
(Oracle 8.1.7 will not be supported by SAP Kernel 4.6B) 
(Oracle 8.1.7 will be supported by SAP Kernel 4.6C only) 

After completion of oracle Stop the service "Oracle TNSlistner 80" 
Select F:\NT\i386\Patchs\8.0.5.2.2\setup & click enter 
Accept the defaults & complete the installation. 
Restart the system.

Dump all the export CDs (6 CDs) into 
E:\dump\db1 - export CD 1 
E:\dump\db2 - export CD 2 
E:\dump\db3 - export CD 3 (To dump type as E:\dump\db1>Xcopy /e f: & enter) 
E:\dump\db4 - export CD 4 
E:\dump\db5 - export CD 5 
E:\dump\db6 - export CD 6 

Insert Kernel CD 

Select F:\46bker\NT\i386\NTPATCH\R3dllins & click enter 
This will install patch for NT. 

Restart the system. 
 
 

Logon as TEKADM
From kernel CD 
F:\NT\common\r3setup & enter 
Enter the following 

System Name - TEK (must be 3 Letters Capital) 
Location - C:\users\Tekadm\install (it comes by default) 
Accept to restart the machine. 

Logon on as TEKADM 
Copy the file "db_ides.r3s" from DB1\IDES\NT\ORA\DB_IDES.R3S 
(18KB files size) to C:\users\tekadm\install 

Start r3setup from 
C:\users\tekadm\install\r3setup & enter 
Select "central.r3s" file & enter 
& Follow as mentioned bellow 

System Name - TEK
Instance no. - 00 
Accept Defaults 
Directory of SAP system -change to D: 
RAM of the sys. - Accept the default 
Location of the KERNEL CD - F: 
Port no. - 3600 
Enter the password of TEKADM two times 
Enter the password of SAPServiceTEK two times 
Start the installation. 
This will come upto 

Select C:\users\tekadm\install\r3setup & enter 
Select "db_ides.r3s" & enter 
System Name - TEK 
Instance no. - 00 
Accept Defaults 
Select WE8DEC (default for r/3 4.x system) & enter 
Oracle dir. - D: 

Location of SAP Database specific files 

SAP Database Drive 

SAPARCH D 
SAPBACKUP D 
SAPCHECK D 
SAPREORG D 
SAPTRACE D & enter 
 

Location of Oracle Data files 

Oracle Data directory drive 

SAPDATA1 D 
SAPDATA2 D 
SAPDATA3 D 
SAPDATA4 D 
SAPDATA5 D 
SAPDATA6 D & enter 
 

Location Database LOG files 

Dir. for LOG files Drive 

ORIGLOGA D 
ORIGLOGB D & enter 
 

Location Mirrored Database LOG files 
(Change from D to C) 

Dir. for LOG files Drive 

MIRRLOGA C 
MIRRLOGB C & enter 

Accept the default RAM & enter 

Location of export CDs dump 

CD name Location Copy destination 

KERNEL F:\46bker 
EXPORT1 E:\dump\db1\1 
EXPORT2 E:\dump\db2\2 
EXPORT3 E:\dump\db3\3 
EXPORT4 E:\dump\db4\4 (Clear this field) 
EXPORT5 E:\dump\db5\5 
EXPORT6 E:\dump\db6\6 & enter 
 

Enter the Password of TEKADM
No. of parallel process - 1 
Start installation. 

Wait for 14 to 15 Hrs & installation will come Upto 91% & will ask for SAPr3 password. 
Enter the password of TEKADM & enter 

This will come upto 95% 
Open SAP Management Console from desktop & Right click "TEK" & start the service. 
Wait for the service to start & will change from yellow to green. 
Come to the r3setup screen & click next. 
This will bring upto 100% & the installation is over. 
Exit the r3setup & stop the "TEK"service & Restart the system. 
 

POST INSTALLATION TASKS 

After SAP installation, install SAPGUI in the server. (CD 9) 
Restart the system 

Open SAP Management Console & start the sap service. 

Start the Sap Frontend from the start\programs\sap frontend\sapsrv. 

Logon as 
Client 000 
User name DDIC 

Password 19920706 
Language en 

CD Title------CD Location-----------CD copy to this location 
kernel--------Dump location1-------clear , don't re copy 
cd1-----------Dump2--------- -------clear, this field 
cd2-----------........3-----------------clear 
cd3-----------.........4----------------clear

Fast Links:
Ctrl Files Deleted in IDES
IDES System crtl Files are Deleted

Get help regarding your Basis problems
Do you have a SAP Basis Question?

SAP Books
SAP Certification, Functional, Basis Administration and ABAP Programming Reference Books

SAP Basis Tips
SAP BC Tips and Basis Components Discussion Forum

Best regards,
SAP Basis, ABAP Programming and Other IMG Stuff
http://www.erpgreat.com